How to use your Notary Stamp
|
Here are a few tips to get the best, sharpest impression from your notary stamps:
- Notary Stamp Storage
Be sure to keep your notary stamps in the proper environment. It is important that you don’t keep your notary stamp by a heating or cooling vent. A constant stream of cool or hot air can, over time, dry out the stamp. We also advise that you don’t store your notary supplies in your car for the same reasons. A car can be quite hot in the summer and cold in the winter. The heating and cooling can also contribute to the adhesive that holds the die portion of your stamp to weaken. A notary die is the piece that contains your notary’s name and other crucial notary information. The differences in temperature can cause the adhesive to weaken and the notary die to shift or get stuck within the notary stamp.
- How to apply your notary stamp properly
When stamping, be sure to stamp on a completely flat surface. When notarizing a document be sure to check for paper clips, staples, and anything else that would lie under the area where you will be using your notary stamp. You can also check to ensure that the surface does not contain a grooved surface, like a wooden desk for example. Here, at Anchor Stamp, we place a few sheets of copy paper or an ultra-thin piece of cardboard under the documents we stamp.
- When to reink your notary stamp
Always have some refill ink or replacement notary ink cartridges on hand. You never want to be in a situation where you are notarizing an important document and the ink is so light that it gets rejected. It is most important that you have the correct ink and replacement cartridges for the corresponding notary stamp. There are varying types of stamps and manufacturers like Trodat and Shiny.
If you follow these simple guidelines, you will ensure the highest quality notary impression.
You can always contact us at Anchor Stamp, and we’ll be happy to guide you. We also offer refill ink and replacement ink cartridges on our website, www.anchorstamp.com
For all your notary supplies, contact us at Anchor Stamp. We offer a wide variety of notary stamps, notary seals, notary accessories and notary ink. Please visit us at www.anchorstamp.com Back to Top
|
What type of notary stamp should I purchase?
|
When purchasing a notary stamp it is important to know your options. Here are some simple tips for purchasing a notary stamp:
- Notary Stamp Guidelines
The first thing to do is check your state’s notary laws and notary stamp guidelines. Some states require rectangular notary stamps, some states require round notary stamps, some states require the state emblem be included and some states prohibit the use of the state emblem. There are some states that have strict notary stamp guidelines while others allow notaries to purchase a wide range of notary stamp formats. www.anchorstamp.com only offers state-approved notary stamps so you never have to worry about using the wrong notary stamp.
- Notary Stamp Ink
What color ink should I select for my notary stamp? Here again, the answers vary according to state’s notary laws. Utah, for example requires purple ink for notary stamps. Tennessee notary law prohibits black or yellow ink for their notary stamp guidelines. Tennessee most commonly uses blue ink for notary stamps. We find that Georgia notaries sometimes request Blue Ink. Most notary stamps utilize black ink so that the notary documents are photographically reproducible. A lighter color ink doesn’t always copy well and may appear light. We always suggest using black ink as long at your state approves the use of black ink.
- Notary Stamp designs and formats
Anchor Stamp can create your notary stamp as you wish using the appropriate ink color and design according to your state specific notary laws. It is important to purchase from a company that specializes in notary supplies to ensure that you purchase a notary stamp that adheres to notary state law. If your state allows varying ink color, you can easily request it in the Customer’s Instructions portion of our website,www.anchorstamp.com
If you follow these simple guidelines, you will ensure the highest quality notary impression. You can always contact us at Anchor Stamp, and we’ll be happy to guide you. We also offer refill ink and replacement ink cartridges on our website, www.anchorstamp.com
For all your notary supplies, contact us at Anchor Stamp. We offer a wide variety of notary stamps, notary seals, notary accessories and notary ink. Please visit us at www.anchorstamp.com
Back to Top
|
|
Most people believe that notaries simply "notarize signatures." This greatly oversimplifies a notary's duties and responsibilities.
Notaries derive their authority from their state governments. They are "appointed" or "commissioned" by a top official of their state, generally the Governor, Lieutenant Governor, Secretary of State or Treasurer. Each state has its own unique notary laws and notaries must follow the laws of their particular state. This means that notaries in one state may have authority to perform duties that notaries in another do not.
In all states, a notary's chief responsibility is to act as an impartial witness in the execution (signing) of documents, and to certify the facts of such transactions in a notarial certificate. By properly performing their duties, notaries help deter fraud and promote the integrity and reliability of document transactions.
Signers of documents requiring notarization must physically appear before a notary, prove their identity to the notary, and acknowledge signing the document voluntarily for its stated purpose; OR swear/affirm that the contents of the document are true. The required notarial act is determined by the composition of the document or is at the direction of the signer or other party involved with the document--it is not determined by the notary.
Notaries convey the facts of a notarial act/transaction by completing an official statement called the "notarial certificate." The notarial certificate is always signed, and often sealed (depending on state requirements) by the notary. The notarial certificate commonly appears at the end of a document or is attached to the document as a separate sheet. The most familiar notarial certificate language reads substantially like: "Acknowledged before me by (Signer's Name) this (date) day of (month), (year)" or "Sworn/affirmed and subscribed (signed) before me this (date) day of (month), (year)."
The format of a notary's seal, and whether or not a notary is actually required to use a notary stamp or notary seal, is unique to each state and is set forth in each state's notary laws. You can trust Anchor Rubber Stamp to produce the highest-quality notary stamps and seals that COMPLY with your state's requirements.
A notary may perform notarial acts ONLY while his or her commission is current. The length of a notary's commission term varies by state.
To order any of our high-quality notary supplies please visit our homepage: www.anchorstamp.com
The preceding information appears courtesy of ASN; Copyright 2012. Unauthorized use is prohibited
Back to Top
|
Safeguard Your Notary Seal
|
Can you put your hands on your notary seal at this moment? Do you know exactly where it is? Is it safely locked away where no one but you can get to it?
You, and only you, are responsible for the security of your official notary seal, your recordbook, your notary commission certificate and any other documents relating to your work as a notary public. This means that your seal and your other notary items must be safely stored and accessible ONLY by you, at all times.
What if your notary seal is lost or stolen and falls into the hands of the wrong person? Your notary seal can then be used to perpetrate fraud on unsuspecting individuals in your name.
Even persons you trust can cause you big problems if you allow them access to your notary seal. Co-workers, for example, will sometimes "notarize" for an absent notary by stamping a document with the notary's official seal--not realizing that this is strictly prohibited and that the notary must answer for any loss that might result.
Some employers, especially those who have paid for their employee notaries' commission and supplies, mistakenly believe they have the right to lock up an employee notary's seal and allow the notary access only when a notarization is desired. Quite the opposite is true: no matter the circumstances, only the notary may physically control his/her notarial seal. If an employee notary leaves the company that paid for his/her commission, seal and supplies, ALL those items stay with the notary, not the company.
Your official notary seal conveys the authority of your office, and you are accountable every time it is used. Always safeguard your notary seal!
To order any of our high-quality notary supplies please visit our homepage: www.anchorstamp.com
The preceding information appears courtesy of ASN; Copyright 2012. Unauthorized use is prohibited
Back to Top
|
How To Properly Dispose of Your Old Notary Seal
|
What should a notary do with an official notary commission stamp or embosser (your notary public seal) from an expired commission?
Some states have specific steps that the notary must take, such as submitting the expired notary seal to state notary authorities (most commonly, when the notary's commission is expired and not renewed). Check your state notary statutes and rules to determine if you might be subject to such a requirement.
If your state has no conflicting instructions for the disposition of your notary seal when your commission term expires, you must deface or destroy your expired notary seal to ensure it can never be used again. This is a valuable fraud-prevention measure that protects you, but do you know how to carry it out effectively?
The old notary seal must be defaced in a way that makes a legible seal impression impossible. That is, the portion of the seal that leaves an ink impression or embossment must be destroyed. (We know of a notary who smashed his self-inking stamp case to smithereens with a hammer, but left intact the rubber pad that was used to make the seal impression.)
- To destroy a self-inking notary stamp, put the stamp case upside-down on a non-slippery surface and push down on the case to expose the stamp surface. Carefully peel the rubber impression pad away from its base. Cut up the pad with a pair of scissors, and distribute the pieces of the pad into at least two different trash containers
- Destroying a metal notary embossing seal is a little more involved.
- One way is to remove the die insert from the embosser handle and carefully deface the raised portion of the seal impression with a heavy-duty steel file. This works especially well if you break the die insert into two pieces. Discard each die insert piece into separate trash containers.
- Another method is to contact your local law enforcement agency, and ask if you may turn in the embossing seal's die insert to be melted down with confiscated firearms. (We include this because we actually spoke with one local law enforcement agency that was happy to accept die inserts for melting.)
Never simply ignore your old, expired notary stamp or notary seal—a forgotten notary stamp or notary seal in the wrong hands can be used to commit fraud that you would be called upon to explain. Take a little time to properly dispose of your old notary stamp or notary seal!
To order any of our high-quality notary supplies please visit our homepage: www.anchorstamp.com
The preceding information appears courtesy of ASN; Copyright 2012. Unauthorized use is prohibited
Back to Top
|
Notary Stamp/ Notary Seal Usage
|
Notary Stamps Anchor Rubber Stamp offers a wide range of notary stamps. The best type of notary stamp is the pre-inked model. The pre-inked notary stamp creates the highest DPI impression available. This notary stamp operates by pressing down on the handle and the stamp simply kisses the paper. There are fewer moving parts involved in its operation. This notary stamp also uses a high-quality, oil-based ink. When re-inking the notary pre-inked stamp, it is essential to use the proper ink. Using the wrong ink can result in a distortion of the lettering.
Anchor also manufacturers high-quality self-inking notary stamps. The self-inking stamp has a die enclosed inside the body of the notary stamp. The notary presses down and the die rotates downward to ink the paper before rotating upward to re-ink itself on the pad. This notary stamp uses a water-based ink contained within the pad located horizontally in the middle of the stamp frame. Again, it is critical to use the proper water-based ink when re-inking. Use of an oil-based ink will cause the die to swell to the point that the impression looks like a big blob.
For traditionalists, Anchor also offers classic notary stamps; that is, the old-fashioned rubber stamp with a die glued to a mount. This notary stamp requires the use of a stamp pad. Here, the equal distribution of pressure is needed to make an even impression. All notary stamps require a flat, porous (non-glossy) surface to maximize the quality of the impression and ensure a professional impression every time.
Notary Seals (also known as Notary Embossers) Anchor Rubber Stamp offers three different types of notary seals: The hand-held pocket notary seal, the notary desk seal, and the Designer Notary Desk Seal. The pocket notary seal is the most commonly used. The difference between the two items is that the desk model allows for more leverage and is designed for frequent usage. The notary desk seal also features four rubber feet so that it can stand alone with good stability. On the other hand, the pocket notary seal is the tool of choice for the notary public who delivers mobile notary public services. If you plan to offer mobile notary public services, the pocket notary seal is the one you want.
When receiving either notary seal, the first thing you should do is slide back the lock on the top while squeezing to open the seal. These seals are designed for single-sheet use, since multiple sheets may cause early wearing. We recommend keeping these seals in the closed, locked position when not in use to prevent dust and debris from entering the unit. We strongly suggests keeping the notary seals in a moderate temperature range. Extreme heat or cold could cause the adhesive to loosen over time and the bottom inner wording may shift slightly. This would result in an uneven impression.
Follow the above recommendations to ensure clean, crisp impressions of your notary stamps and notary seals for many years to come.
To order high-quality, affordable notary supplies please go to our homepage: www.anchorstamp.com
The preceding information appears courtesy of ASN; Copyright 2012. Unauthorized use is prohibited
Back to Top
|
|